Nissan Repair: head gasket replacement, head gasket replacement, torque settings

Question
i wanted to know if youhave the torque settings 4 the e15s sunny 1988 or can i use the same as the 1600 posted earlier.
thanks

Answer
Hi Terrell -

Sorry for the late response as I am in Hawaii, so there are a few hours -

Anyway, the proper torque for your cylinder head is 51 - 54 foot pounds. Start the sequence from the middle of the head out alternating sides with 22 ft pounds, then go to 51 - 54.

Hope this helps.
calvin