Nissan Repair: nissan, nissan terrano 1996, tie rod

Question
have you got the breakdown of the front near side hub for a nissan terrano 1996 model

Answer
Denise,

No, I don't have the breakdown for the hub.  Most are pretty much the same with removal of the strut, spindle, tie rod end, caliper and if you have a four wheel drive the driveshaft has to come out.  This is the most difficult part since the nut is tight and you will need a breaker bar.  I found breakeryard.com where you could get a used unit since that is much easier than rebuilding yours.  Having a shop press the bearings out and installing new ones is a difficult process getting the pre-load correct so that the new bearings will last as long as the originals.
http://www.breakeryard.com/cars/model/nissan/Terrano%202%204x4/Hub%20carrier.asp...