Nissan Repair: Clutch cylinder - bleeding, clutch slave cylinder, clutch cylinder

Question
I just rebuilt the clutch slave cylinder on my '93 Nissan p/u.  How do I bleed the system?  I noticed a juction block on the firewall - does that come into play?

Thanks

Ralph

Answer
prob best to replace the mstr/cyl also  ........but.....fill the m/c, have someone stroke the pedal 2/3 times,, hold it down,......then open the bleader screw on the sl/cyl for bout 30 sec,,close the screw then stroke again........repeat as needed till a solid stream of fluid comes out/////no air