Pontiac Repair: Turn Signal, potiac, turn signals
Question95 Potiac Sunfire
My Turn Signals are out and I'm hoping that you can help me figure out what is wrong with it. When I turned on the signal the light went on, on the inside and outside, but would not flash. I pulled out the flasher plug and then the signal started flashing erratically. When I replaced the plug with a new one it didn't work at all (the light would not come on at all, inside or out). I checked all the fuses and I changed the bulbs, but that didn't work either. Do you have any ideas of what it could be? Thanks for the help.
Jennifer
AnswerHi, check and make sure you have a good connection at the flasher. some times you can buy a bad flasher. This can also go back to the switch. check and see if you have fire going to the flasher. If there is no fire then it could be a bad ground wire or the switch.