QuestionQUESTION: I have an Echo backpack blower that I need to constantly adjust the choke to keep it running and is getting worse and losing power. I suspect I need to take the carb apart and soak it in cleaner to clear the jets, etc.
Is there a carb rebuild kit for this device and suggestions as to where to buy? Are there any gotchas I should be aware of or suggestions on cleaning/rebuilding this carb?
Thanks,
Ed
ANSWER: Yes, carb kits are readily available. Yes, there are a few tricks.
If you have 2 fuel lines, MARK them before removing so you know which way to re-connect them.
Use a flashlight or remove the carb and let me know the carburetor brand (Zama, Walbro, Tilleston) along with the carburetor model and I will look up the kit.
The model number will be stamped on the carb, WA, WT or may C1U.
Let me know what carb you have.
Eric
---------- FOLLOW-UP ----------
QUESTION: Hi Eric,
I had to take the carb off to see the numbers. It is a Walbro and there are some numbers stamped on the side and they are: 190 426. There was also a couple letter on top of the casting: WYK. Other than that, those were the only markings.
FYI, it's an Echo model PB-260L. Are there any sites you can suggest that has an illustrated parts breakdown of all the components?
Thanks,
Ed
AnswerCarb parts diagram/repair manual:
http://www.walbro.com/media/21913/WYKseries.pdf
http://www.walbro.com/servicemanuals.aspx
Parts list for the blower:
http://www.partstree.com/parts/?lc=echo&mn=PB-260L++S%2FN%3A+P05913001001+-+P059
K13-WYK Carb kit for the WYK carb.
Eric