QuestionQUESTION: I have a John Deere LX176 and I am not getting any eletrical flow when I turn the ignition key. It was staring fine as we were using it Saturday with many starts then it went dead. I tried to jump it to no succese. As it was hooked up to the cables the battery indicator would dimly light up and go out. I trickle charged the battery for 24 hrs and it started. I cut it off to refuel and once again no electrical flow. I replaced the battery and still no electrical flow. I have removed the ignition switch and cleaned all contacts and still nothing. Any sugestions would be greatly appreciated.
ANSWER: What engine is on the mower? Briggs, Kohler, Kawasaki, Honda?
The link below is a good source of information on checking charging systems.
http://www4.briggsandstratton.com/miscpdfs/RNT/alternator_replacement.pdf
Take a look at the link. Also, do you have a multimeter to do some tests?
Send me the engine info as well so I can see what you have.
Eric
---------- FOLLOW-UP ----------
QUESTION: 14 hp Kawasaki and I do have a multimeter.
AnswerIs th eneigne model FC420V?
If so, Google "FC420V pdf"
Look for www.mymowerparts.com, then
www.mymowerparts.com/pdf/.../FC290V-FC400V-FC401V-FC420V-FC...
The manual is there and the regulator check starts on page 35. Check the regulator as well as unregulated output.
Let me know what you find.
Eric