QuestionQUESTION: Ok so i got a Go kart the other day for free and the motor didnt crank at all. So i cleaned out the carb and made sure it had fresh gas. I got it running but it will only crank and run when its at full throttle. When i let off throttle it stalls and cuts off. I was thinking a gasket somewhere. What do you think the problem is? Thanks! Tyler
ANSWER: What engine do you have? It sounds like the low speed carb circuit is still dirty. I need to know the engine brand along with the model, type, and code/serial number to know what you are working on.
Eric
---------- FOLLOW-UP ----------
QUESTION: Im at school now in class but i know its a Tecumseh 6.0HP Power Sport motor. I can get the serial number this afternoon if you really need it. Thanks!
AnswerOne of these links should be the engine repair manual:
http://www.smallenginesuppliers.com/html/engine-specs/tecumseh/Tecumseh_L-Head_E
http://www.smallenginesuppliers.com/html/engine-specs/tecumseh/Tecumseh_4-Cycle_
First I would check the throttle linkages and make sure you can move the carburetor butterfly shaft by hand. It should move freely and easy.
Second I would perform a static governor adjust to make sure the governor system is properly configured.
If the engine still runs at full throttle only the governor spool or weights may be bad. I have seen several Tecumseh engine with defective governor spools/weights.
Perform the first two recommendations and let me know what happens.
Eric