QuestionQUESTION: Hi, I bought a old snowbower. Yesterday, in the beginning,it can start very easy and then I used it for 30 min. After that, there is no gas before fining my job and I filled it, but it can't start again. I mixed 2-cycle engine oil with gasoline just 1 month ago (14 ou oil/1 gallon gasoline). What's the problem. Thanks
ANSWER: Did you try replacing the spark plug? Does the engine produce spark? Do you have an engine compression tester gauge to check the engines compression?
Try a new spark plug first.
Eric
---------- FOLLOW-UP ----------
QUESTION: I have tried the spark plug and there are strong spark, I have also tried another spark plug which is for lawn mower, it still didn't start even if I dropped several gasoline into the spark plug hole.
I haven't engine compression tester gauge and I have to buy one?, how can I know the engine compression is lower and there are other problems? Thanks.
BTW, the snow blower is Topflite 20.
ANSWER: It wouldn't hurt to check the compression but if it refuses to start when priming with gas in the spark plug hole it tells me there may be a compression issue.
Was the spark plug the same heat range?
Eric
---------- FOLLOW-UP ----------
QUESTION: The spark plug was the same heat range. I still need a compression tester to test compression? Thanks
AnswerAre there ny other numbers located on a sticker about the size of a business card? You may have an MTD made blower with a Tecumseh 2 cycle engine.
See if there are any numbers on the blower frame/housing and check the engine as well as there is usually an engine model number.
Eric