Small Engines (Lawn Mowers, etc.): Snow blower, plastic pulley, woodruff key

Question
QUESTION: I have a Snow Chief SC 320 that I hit something with and need to take off the impeller to have straighted and welded.

I have it apart to the pulley and belt but unsure how to get the plastic pulley off the end of the shaft to remove it.

Can you assist with instructions please ?

Thanks

ANSWER: Hello Phil:

>>The SC 320 is the Series Model.
>>Send me the Model Numbers Off the Unit (Unit Model Numbers), Please. With these I can Locate the Proper Manual and Better Assist you.
>>Thanks.

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: Thanks for the reply John.

Here is what I found

Snow Chief SC 320  
 
General Power Equip Co  
Harvard IL  
 
Service# 603229
Model# SC320-N
Date Code 49M
 
Tecumseh Engine HSK600  1674S (D) 4138H

Answer
Hello Again Phil:

>>Usually these Pulleys have an Allen Lock Screw that Holds the Pulley Tight to the Woodruff Key.
>>Loosen the Allen Lock and then the Pulley should Slide Off the Shaft.
>>I have Contacted General Power Equip Co and Inquired about this Product and they will Return my E-Mail within 72 Hours.
>>Please Remind me if I Fail to Contact you at the End of 72 Hours.
>>Thanks.

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John