Small Engines (Lawn Mowers, etc.): BCS tiller model 720, manual tranny, bcs tiller

Question
Hello John; Last spring I through a rod  in my B & S powered BCS tiller and unbolted the 4 bolts expecting to remove the engine and  repair the break in the block and rebuild the engine while in there. I found that the engine removal is either not that simple or it is stuck in the clutch. It is an 8 hp B& S mounted on a model 720 harvester tiller with serial # 115956. I bought it used and got no info on it and found very little info online that would indicate how to pull the engine. Can you help, John? Also where I can find a user's and/or service manual (tranny lube,clutch adjust, do's and don'ts, etc)

Answer
Hello Dan:

>>Try this Addy; http://bcsamerica.com/pdfs/720.pdf for an Illustrated Parts List for this Unit.
>>From your Description it Does Sound like the Crankshaft is Stuck in the Clutch Assy.
>>If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John