QuestionRe my McCulloch Pro-Scraper 28S trimmer; There are two lines come out of the fuel tank. I'm sure one goes to the primer bulb marked 'in' (the one with the filter attached) but I am unsure where the other line goes. There are two ports on the carb. One port (line), I suspect, will connect to the primer and therefore the line coming out of the tank with the filter. Hmmm, which port, the right or left port?
AnswerHello Rich:
>>One Port is a Return to the Tank.
>>The Inlet Port of the Carburetor is the Port Nearest the Flat Plate with 4 Screws holding it Onto the Carburetor Body.
>>The Return Port is Nearest the Plate with a Single Screw in the Midle of the Plate.
>>There are Many Different Styles of Carburetors used on these Units and they all Vary in Design.
>>I Require the OEM (Walbro, Zama, ect) and the Model Numbers Off the Carburetor. With these I can Locate a Breakdown of the Carburetor and Better Assist you.
>>If you Hit a Snag or this Does Not Correct the Problem, I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. All Follow up Questions are Accepted at Any Time. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John