Small Engines (Lawn Mowers, etc.): rod to crank assembly, briggs and stratton, question pool

Question
I am putting a new rod to the crank on a Briggs and Stratton motor 12.5 hp and need to now which way the bolts face on the cap to the valve side or away from the valves

Answer
Hello Butch:

>>Sorry for the Delay. This Question was Located in the Question Pool and I can Only Answer Questions from the Question Pool when I am Not Answering Questions here or at the Other Site I Answer Questions at.
>>The Cap is Positioned on the Cam Side of the Crankshaft.
>>If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John