Small Engines (Lawn Mowers, etc.): LT 120, bolt torque, head gasket

Question
My John Deer LT120 started smoking and is using oil. It still cuts well but have to keep a check on the oil. What  to do?

Answer
Hello Rose:

>>According to the Breakdown, this is an OHV Engine.
>>I Suggest you Check the Head Bolts and make sure they are Tightened and if they are, then
>>Check the Head Gasket.
>>The OHV Engines can Blow the Head Gasket between the Push Tube Galley and the Cylinder and cause the Problem yoy Described.
>>You can Locate the Correct Specification (Bolt Torque, Valve Clearances, ect) for this Engine at this Site Addy; http://outdoorpowerinfo.com/engine_specs/ and Select your Engines OEM and the Specification Chart you Require.
>>If you cannot Locate the Specifications you Require, then Send me the Make, Model, Type/Specification Numbers Off the Engine, Please. With these I can Locate the Correct Manual and Better Assist you.
>>You can View a Breakdown/IPL of the Engine and Mower at this Site Addy, http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.H... and Enter the Model Numbers L120 and Click Find. Then Select your Model from the Search Results Area. Then Select the Sectional File. Then Select the Section of the Mower you Wish to View Online. *You can Drag the View Windows for Better Viewing.*
>>If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John