Small Engines (Lawn Mowers, etc.): transfer case, honda gx390, honda engines

Question

gear   QUESTION: I have a Honda GX390 13hp hooked to a cat51 4000psi pressure washer(no good) I have a transfer case in between with gear reduction. How do I remove this gear from the shaft???

ANSWER: HI BILL

CAN YOU LET ME KNOW WHAT THE NUBERS OFF THE ENGINE MOUNTING FOOT OR SIDE OF C/CASE  ARE

SHOULD BE SOMETHING LIKE EG  -: GX390 UT1-HA2  ETC

THIS HELPS ME WITH APPROPRIATE IPL FROM WEB SITE

http://www.honda-engines-eu.com/en/welcome.html



PLEASE LET ME KNOW AND I WILL DO MY BEST TO LET YOU KNOW HOW TO REMOVE CASING AND GEAR

CHEERS PAUL  

LOOK FORWARD TO HEARING FROM YOU  

---------- FOLLOW-UP ----------

QUESTION: Paul,
Thanks for getting back to me. The # was found on the left side of the case in reference to the pic I sent

GX390
389cm3

Cheers to you!
Bill

Answer
HI BILL


I NEED THE NUMBERS STAMPED INTO THE MOUNTING FOOT OF THE ENGINE

THEY SHOULD BE SOMETHING LIKE THIS EG  GX390  ???  UT1 ???  

OR SHOULD SEE A RAISED PLATE ON C/CASE SOMWHERE WITH  NUMBERS  STAMPED INTO IT


THE NUMBERS U GAVE WERE ONLY  INDUSTRIAL DESIGANTION  AND CC RATING


CHEERS  HOPE TO HEAR BACK