QuestionI have a powerwasher with 6hp Briggs & Stratton engine that has been sitting for over a year. When I try to start it, it runs for about 5 seconds and dies. Any suggestions?
Answerhi richard
sound like the engine might not be getting any fuel ?
check fuel is it fresh ?, drain and clean tank
is flow of fuel from tank to carb good? check remove f/line from carb end
is the float bowl full of fuel ?- remove main jet from bowl
is main jet blocked with green gum from stale / evapoated fuel ?
is the needle valve stuck / sticking from green gum ?
might pay to remove carb and give complete cleaning to remove any green gum residue
that may be restricting /blocking jets & openings etc
fit new plug, and change oil
all going well and everything being = good compression , spark and at right time , fuel supply
all working should run
cheers hope this helps
paul