Small Engines (Lawn Mowers, etc.): Poulan/Craftman Chainsaw Piston, snap ring pliers, chainsaw piston

Question
john,

I have a 13 month old saw that the crankshaft has broken at the clutch.  I have a new crank and connecting rod.  Is there a special tool to remove the piston pin and clips from the connecting rod?  The piston and cyl are in good shape with no scorning, been running 50:1 which seems to help with the poulan piston problems.

Answer
Hello Steve:

>>You can Use an Ice Pick or a Small Pocket Screw Driver to Pop Out the C-Clips that Hold the Wrist Pin (Piston Pin) in Place.
>>If the Wrist Pin Clips have the Small Ears to make Removal Easier, then an Offset Snap Ring Pliers will Compress the Clip for Removal.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John