QuestionQUESTION: I'm looking for a cap for the rear hydrastatic reservoir, for a Dynamark 16/43 lawn mower. The model was purchased in 1993. Can you help me locate one? Thanks, Rick
ANSWER: Hello Kent:
>>You can Use the Site Addys at this Site Addy; http://www.yetmans.mb.ca/antiques.html to Search and Locate New/Used Parts for this Unit.
>>Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers are Usually Located Under the Seat on a Sticker or Tag on the Body.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: John, the model number is D4316001. Serial #001294329717. Code #3040. It's a Dynamark mower. Also note that it has a Hydro Gear rear end. Thanks, Rick
AnswerHello Again Kent:
>>This is an Antique/Obsolete Unit.
>>If the Transaxle ID Tag is Still on the Transaxle, you May be Able to Purchase a Reservoir Cap from Hydro-Gear.
>>On the Transaxle is an OEM Identification Plate. Send me the Information Off of This Plate, Please. With this Information, I can Locate the Proper Manuals and Better Assist You.
>>Thanks.
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
