QuestionHave a new MTD snowthrower with the joy stick chute. While I would have preferred the old style this was all I had avail at the time I needed a new one. the chute gets alot of adjusting with the vast area I blow. It has already gotten so that it will not old left to right position so I must manually hold position while blowing and now the mech seems to have locked up to adjust the vertical discharge as well. Would appreciate a source on how to service or advice. The model # is 31AH6ZLB704 with a Briggs engine. Thanks
AnswerHello Gary:
>>I had a Questioner about 4 to 6 Weeks Ago with the Same Problem and I Believe MTD makes a Kit to Change the Chute from Electric to Manual.
>>This being the Weekend, I cannot Contact my MTD Rep to Get you the Kit Number and it is Almost Impossible for me to Locate the Questioner that Asked about the Kit.
>>The Way the Site is Set up, It is Almost Impossible for me to Do Research and then Locate the Questioner I was Doing the Research for.
>>That is Why I Ask for a Reminder from Questioners that I am Doing Research for. It Makes it Easier for me and I can be Sure they get the Information as Soon as I have it.
>>Are you Sure this is a Model 31AH6ZLB704 and Not a Model 31H6ZLG704?
>>If you Wish, You can Contact MTD at 1-800-269-6215 at during the following times: Monday-Friday 8am-5pm and Saturday 11am-3pm EST. (SEASONAL HOURS MAY VARY).
>>Tell them you are Searching for the Manual Chute Adjustment Kit to Replace the Electric Chute Adjuster Due to Problems with the Electric Adjuster.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John