Small Engines (Lawn Mowers, etc.): briggs and stratton 21.5 hp, engine bottoms out

Question
Hello, I have a craftsman riding mower with a B&S 21.5 hp intek I/C platinum engine. I am having problems getting it running after its 6 month slumber. It turns over well but will only run when I fill the line from the carb with gas, then dies when that runs out. I replaced the fuel filter. The small (approx. 1 1/2 long)hose that goes to the valve cover has a small hole which I wrapped with tape as a temporary fix (which didn't help). It had a similar problem 2 years ago Which i remedied by filling the line between the fuel pump and carb with gas. After that it ran fine. Do I need a new fuel pump? What is the short hose coming from the valve cover called? Where can I get these parts? Thank you for  any help you can provide,

Answer
Hello Jeremy,

You will find parts for your machine by contacting Briggs & Stratton with the engine model and serial no.

Any lines that you find with holes should be replaced with new lines.

Check:

> If your fuel cap vent is clogged.If it is replace it.  

> If your carburetor is dirty or fouled up with sediment.

> If your carb. is properly adjusted to specifications.

> Check that governor is not sticking or binding
- if it is improperly set to RPM.

>  Check carb linkage shafts or shutters sticking or binding.

>  Check if Spark are incorrect or intermittent spark or plugs fouled.

These are some basic recommended checks to start off.

Let me know how it goes,

I hope that this info helps,

Howard
Ps. you can check the B & S website for more info.