Small Engines (Lawn Mowers, etc.): drive part, outdated unit, agway

Question
QUESTION: I am working on an Agway 1033 snow blower, I believe it was made by Noma Canadiana. The model # is not readable the S/N is 351205. I need part # for the shaft that the drive disc is mounted to the gear at the opposite end has sheared off. Any input will be greatly appreciated.

 Thank You
    Kevin

ANSWER: Hello Kevin:

>>Without a Model Number I am in the Dark and Really Unable to Properly Assist you.
>>However, You can Use the Site Addys at this Site Addy; http://www.yetmans.mb.ca/antiques.html to Search and Locate New/Used Parts for this Unit.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John


---------- FOLLOW-UP ----------

QUESTION: John
 I think I have uncovered part of the model # the tag has 3 lines as follows
AGWAY
AG10323      S/N 351205
6130    6
any help would be great Thanks Kevin


Answer
Hello Again Kevin:

>> Husqvarna Purchased Electrolux Lawn Products (Agway and Others). This is Considered to be an Outdated Unit.
>>You can Use the Site Addys at this Site Addy; http://www.yetmans.mb.ca/antiques.html to Search and Locate New/Used Parts for this Unit.
>>I have Contacted my Husqvarna Representative and will have an Answer from them by Monday. If I Fail to Follow Up to you by then, Please Remind me of this Question. Sometimes the Question will be Hard to Locate and I have Trouble Sending a Follow Up Answer. Thanks.

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John