QuestionQUESTION: I am looking to replace the worn friction wheel on this 5 hp, Tecumseh engine, snowblower. I believe it is a AMF Snow King probably made in the 60s or, early 70s. So far, no one recognizes the model #. The model of the engine is Homko model H40-55116F Serial no. 6234-14070. The steel discs on either side of the friction wheel rubber are approx 5 5/8" in dia. The friction wheel fits on a 5/8" shaft. The 2 discs are held together by 6 bolts.
ANSWER: Hello Don:
The Newer Discs have 4 Bolts Holes. You can Use the Site Addys at this Site Addy; http://www.yetmans.mb.ca/antiques.html to Search and Locate New/Used Parts for this Unit. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: John, I tried looking on those sites. I didn't see any that would be helpfull. Can you be more specific as to where I could find one or, which brand it is that would have 4 holes and, would be the size-diameter as the one I described. Thanks for helping. God bless.
AnswerHello Again Don:
Try your Local Toro or Snapper Service Center. They Both have Snow Throwere/Blowers that USe the Drive Disc you are Inquiring About. Im Not Sure of the Diameter of the Driven Disc. I Do Not have 1 in Stock and there are No RERs on the Lot. Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
