Small Engines (Lawn Mowers, etc.): 8HP B/S Choke Linkgae issue, throttle linkage, question pool

Question
I have a R72 w/ a Briggs 8HP model number 190707, type 5830. My choke/throttle linkage cam off,and I can not find where the loop end goes to the chassis. It is the linkage that opens and closes the choke, not engine speed. I have looked everywhere on the unit that moves back and forth with the lever, but nowhere seems to make sense. ANy help on this would be great, thanks

Answer
Hello Eric:

Sorry for the Delay. This Question was Located in the Question Pool and I can Only Answer Questions from the Question Pool when I am Not Answering Questions here or at the Other Site I Answer Questions at and I am on Vacation and had a Few Minutes to Answer a Few Questions. The Loop Sets in a Slot of the Throttle Control Bracket. When the Throttle Cable is Moved, it Moves the Throttle Control Pivot and this Moves Until the Engine Revs and/or the Choke Lever is Moved to Engage the Loop End of the Choke Linkage. You can View a Breakdown/IPL of the Engine at this Site Addy; http://www.briggsandstratton.com/maint_repair/manual_and_more/doclist.aspx?categ... and Enter the Model Numbers (XXXXXX) and the First 4 Type Numbers (XXXX) in the Appropriate Boxes and Click GO. Then Select Download PDF. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John