Small Engines (Lawn Mowers, etc.): Honda GCV160A Torque Settings, bolt torque chart, bolt diameter

Question
I would appreciate very much the following torque specs.
Crankcase Bolts
Piston Rod Cap Bolts
Flywheel Nut
The Blade Hub Bolt, All for a GCV160A     Thankyou Very Much

Answer
Hello Bill:

The Torque Specs are as Follows: Crankcase = 15 Foot Pounds, Rod Cap = 190 Inch Pounds, Flywheel Nut = 40 Foot Pounds, Blade Hub Bolt = Depends on Bolt Diameter and Grade. You can View a Bolt Torque Chart at this PDF Addy; http://www.morbark.com/Service/belttorque.pdf . If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John