QuestionI HAVE A MASTER CRAFT ELECTRIC ROTARY TILLER 250 WATT 250 RPM AND WHEN GIVEN POWER THE BLADES DO NOT TURN THERE IS NOT ANYTHING COILED AROUND BLADES I CAN HERE THE POWER TO THE TILLER JUST NO MOVEMENT?
AnswerHello Rayna:
Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you. However, it Sounds like the Pinion Drive or Ring in the Gear Box May be Damaged. The Model Numbers will Help me Give you a Better Idea of Any Other Possible Causes. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
Hello Again Rayna:
The Nuber you Sent are Not Shown in the Microfiche or Online. Please Check the Model Numbers Again, Please. Go to this Site Addy, http://www3.sears.com/ and Use the Model Locator at the Lower Left of the Page. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.