QuestionI am looking for a carburetor for my snowblower engine.
Model HS40 Spec 55232A
Serial 8339
Additional stamped number 12444
Engine runs if I pour gas into carb.
Bowl was full of sediment, float is rusted out. Gas does not flow into bowl at this point.
If I can't find a carb, what could I use for a replacement engine?
Thank you
Dave Bartels
(402) 335-7745
AnswerHello Dave:
I Will Follow up with you on 3/12/08. I Need to Contact Tillotson Carburetor and See if there is a Replacement. Usually there is a Replacement Carburetor for the Older Engines and ONLY by Contacting the OEM can you Locate a Replacement Part Number. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
Hello Again Dave:
I Located the Information for a Replacement Carburetor. Go to your Local Tecumseh Dealer and Request a Service Carburetor for your Engine. As for the Replacement Engine; I will Follow Up on 03/12/08. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John