QuestionQUESTION: i have a small toro powermatic snowblower put new spark plug in at the begining of the season has started and ran like a champ. Last night got into a big drift and the snowblower killed. i went to restart it but the RPM's never came back. I waited for awhile restarted - starts great but it never come back to "full power" What should I look for or do?
rich
ANSWER: Hello Rich:
Does the Unit Idle and Not Rev when you Throttle Up? Does the Unit Rev Up but Not as High as Before? Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: the blower is a CCR powermatic 3 horsepower
The choke control has three settings:
full Choke /partial choke/ off
I tried the unit this am and it started right up - warmed up and ran at @ 20% power as described
AnswerHello Again Rich:
The CCR Powermatic is the Series Model. Please go to this Site Addy; https://lookup3.toro.com/partdex/default.cfm and Select Step 1 to Locate the Location of the Model Numbers I Require to Assist you. If this is a 2 Cycle Engine, then Remove the Muffler and Inspect the Exhaust Port for Carbon Blocking the Exhaust Port. Check the Muffler and Spark Arrestor Screen (in the muffler) for Blockage Also. Thanks.
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
