Small Engines (Lawn Mowers, etc.): troy-bilt/6 hp Tecumseh snowthrower ignition, snow thrower, model numbers

Question
Won't start.  I have two black wires coming off  the back of the ignition swith.  
(1) is attached to the throttle bracket.  The "other" is hanging loose.  In appears
the contact broke off.  Where does this attach?

I also see (1) green wire going to the coil/mag

Answer
Hello Rob:

Send me the Model Numbers Off the Snow Thrower, Please. With these I can Locate the Proper Manual and Better Assist you. Ign Swittches May have the Same Number of Terminals on the Back, but they are Different. Model Numbers will Help me Assist you in the Correct Connection of the Broken Wire. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. Have a Happy Holiday Season and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John