Small Engines (Lawn Mowers, etc.): Blade drive belt replacement, hook ups, drive belts

Question
Sorry. I should have known to do that. The model is 917-258671 and serial # is 061397D005834
-------------------------

Followup To

Question -
Craftsman 46" rider. I need to replace the blade drive belts. How do you remove or drop the deck to install new belts? And what is the procedure to install the new belts?

Thanks for any help you can offer

Answer -
 Hello Richard:

 Send me the Model Numbers Off of the Mower, Please. With these Numbers I can Locate a Breakdown/IPL and can Better Assist you. There are Many different Types of Hook Ups for the Deck Depending on the Model of the Mower. I can Use the Breakdown for Reference Points that you can View Online. Thanks.

 Respectfully

 John

Answer
 Hello Richard:

 Go to this Addy http://www3.sears.com/ and Click the Lawn Equipment Box. Then Enter the Model Numbers and Click Continue. Now Verify tou Equipment  and Click Continue. Now Select the View Diagram of the Mower Lift and Click Continue. This will Open a New Window Showing the Mower Deck Lift Breakdown/IPL. Remove the Sark Plug. You need to Remove the Clips (diagram Numbers 13 and 20). Remove the Drive Belt from the Engine. Disconnect Any Linkage for the Blade Engagement. You can see the Belt Route for the Blade Drive Belt in the Diagram for the Mower Deck. Hope this Helps. I am here if you Require more Assistance. Let me know what Happens, Please. Thanks.

 Good Luck

 Respectfully

 John