You will need the following tools and materials:
-Screwdriver
-Replacement door latch
-Drill
-Measuring tape
-Level
-Pencil
Step 2: Remove the old door latch
1. Use a screwdriver to remove the screws that hold the old door latch in place.
2. Once the screws are removed, pull the latch out of the door.
Step 3: Measure and mark the location for the new latch
1. Place the new latch in the door and measure the distance between the center of the latch and the edge of the door.
2. Mark this measurement on the door with a pencil.
3. Use a level to draw a line perpendicular to the edge of the door at this mark.
Step 4: Drill the holes for the new latch
1. Drill two holes at the marks you made in Step 3, using a drill bit that is the same size as the screws that came with the new latch.
Step 5: Install the new latch
1. Place the latch in the holes you drilled and insert the screws. Tighten the screws until they are snug.
2. Test the latch to make sure it works properly.
Step 6: Clean up
Wipe away any dust or debris that may have been created during the installation.
