Toyota Repair: 91 4runner extra relay instalation, starter solenoid, wire splice

Question
hey i am having the same problem as described in a couple of forums with a warm engine not starting i was wondering if you could describe to me how you put the extra relay in
thanks
zack

Answer
I now have some more information for you.
I'm assuming that you already have the relay.
Using 10gauge wire connect the #30 teminal of the relay directly to the positive battery terminal, the rest of the wires can be 12gauge, connect the #87 terminal to the starter solenoid, the small connector, disconnect the existing wire from the solenoid connector, connect the #86 wire to a ground point, connect the #85 to the cold start injector yellow wire, it may be white, but do not connect it to the black or black/white wire, do not cut the yellow wire, splice into it using either a scotchlock connector or the solder method, mount the relay somewhere under the hood.