Chevrolet: tdc smc, small block chevy, chevy 350

Question
how can you tell when if the number one cilinder is on tdc for a small block chevy 350? im trying to run my valves

Answer
Mike ;
 Hi  well the best way is to remove the # 1 plug and put your thumb over the plug hole-have some one tap the key till you feel your finger pop or get pushed off the hole with force. than look at the timeing mark- it should be on tdc. and with the dist cap off the rotor should be on the no #1 plug spot. than you will be on the no # 1 plug.   ok.

and remove the coil wire so it will not start on you.