Mitsubishi: ignition / starting / electricasl problems, cold air intake, fuse box

Question
Dear sir,

95 mitsubishi GSX
modded:
-air intake
-suspension
NOTES:
-no stereo *all wires taped up.

i have been having problems with my ignition system. for some reason, when turning my ignition switch to the "ON" position, my car blows a fuse.  the fuse that keeps blowing is the 30Amp fuse located inside the engine bay near the cold air intake.  the wire that is affected is the Black/White wire connected to the ignition.  i traced it to a fuse box which it enters and then exits in the rear.  from the rear, i traced it to the firewall and from there, it dissappears.  strange.  i have a manual i bought from the dealer.  any advice on how to BYPASS this ignition wire would be great, or how to fix it.  Please let me know what i can do.  Maybe there is a bad groud wire somewhere connected with the ignition system that i can troubleshoot.  thanks.

Answer
No need to call me sir mate im juz here to help you.

well to me it is a crap earth what u need to do it turn the power to the ignition on and test to see if that whire has any power running to it make sure u turn all the lights and accessories on when doing this so as u dont cut a power whire. now if it has no power at all cut it and make a new earth and that should fix your problem.

Your expert Deano........ ;)

e-mail me if u have anymore problems. [email protected]

Dont forget to rate me