Truck Repair: m11 celect, kickstarter, starter motor

Question
good day,im a mechanic from philippines,m11 cummins starter motor was  constantly running because of deffectived solenoid,it was then removed and repaired,but when it was installed back fault lamp and idle adjust was no longer working,pls help me to solve it,thanks

Answer
Hi Jade,
The first step towards solving your problem is to hook it on "insite software" or "compulink" for proper troubleshooting. Pls look for Cummins Shop or distributor in your area for this exercise and further help.
Furthermore, if the system was ok prior to removing the kickstarter for repairs, check that the ECM is properly grounded to the body of the vehicle.
Kind regards,