Truck Repair: Cummins, cummins n14, screw out

Question
Please, please, please help!
Cummins N14 Celect Motor
CLP 1807
1996 Model
Desperately need the valve adjustment pattern

Would you please help?  

Answer
Valve clearance   INT 0.014     EXH  0.027
  Turn engine to a letter on accy drive,does not matter which one you start with as long as you go in the firing order...1,5,3,6,2,4.
 Adjust injector first then valves.
       A= 1 or 6      B= 5 or 2     C= 3 or 4
Loosed inj locknut & turn screw down clockwise(HAND TIGHTEN ONLY)until it bottoms out,then back screw out(counterclockwise)60 degrees(2 flats on screw)and tighten locknut.Then adjust valves.Turn engine to next letter & repeat until all 6 are done.Install C brakes & torque to 75 ft lbs then adjust clearance.