Takeda Mitsubishi Lancer GTS Ram Intake - Mod Gear - Modified Magazine

01 Takeda USA Mitsubishi Lancer GTS Short Ram Intake
The Takeda Retain Short Ram sealed air intake mounts to the factory intake box, increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response. Takeda air intakes use the brand-new Pro Dry S filter from aFe, which uses a progressive synthetic media, requiring no oil to recharge for maximum convenience and filtration. All Takeda air intake systems come with polished aluminum tubes, Pro Dry S performance air filter, urethane couplers, clamps and all hardware necessary for a simple installation.
afepower.com

02 HPI Racing Switch RTR Scion xB R/C Car
The HPI Switch is a fun FWD electric car that makes getting into R/C quick and easy. The Switch is completely ready to run with a factory-assembled chassis, painted/trimmed body with decals applied and complete electronics that include the transmitter/receiver, reversible electronic speed control, battery pack and AC charger. The Switch can be adjusted for width and wheelbase to accept a wide variety of mini-size bodies and all of the latest HPI Cup Racer bodies.
hpiracing.com

03 ATI Performance Products EVO X Super Damper Pulley
The ATI Performance Products Super Damper for the ’08+ EVO X is offered in a 3 percent underdrive for improved dampening and increased power. Unlike unbalanced underdrive pulleys, which offer no protection to high-performance engines, the ATI Super Damper provides balanced dampening of torsional crankshaft vibrations. The three external bolts allow for the mounting of a dry sump mandrel to the damper.The ATI damper comes with 360-degree, laser-etched timing marks and exceeds SFI 18.1 safety certification.
atiracing.com

04 King Engine Bearings XP Engine Bearings
King Engine Bearings has just introduced the second generation of its XP Bearings. The enhanced tri-metal, copper lead construction with nickel barrier of the XP Bearings features King’s proprietary SecureBond advanced adhesion process. This unique process provides superior stability between the top and intermediate layers. The XP Bearings have a 0.0005-inch enhanced performance Babbitt overlay good for up to 10,000 psi and as much as 30 percent greater load capacity than traditional bearings. It’s suitable for operating temperatures of up to 350 degrees Fahrenheit.
kingbearings.com

05 Innovate Motorsports Wideband AFR Gauge
The new Innovate Motorsports Digital MTX Series air/fuel ratio gauge utilizes the only 100 percent digital wideband air/fuel ratio technology on the market. The award-winning patented DirectDigital technology we use is faster and more accurate than common UEGO gauges and is now more affordable. In addition, the gauge features a water-resistant casing, interchangeable faceplates and bezels, and two fully programmable linear analog outputs for use with aftermarket engine management systems and data loggers.
innovatemotorsports.com

06 AEM Universal High-flow Inline Fuel Filter
This high-flow -10 AN inline fuel filter is CNC-machined from 6061-T6 aluminum and hard-anodized black. AEM’s engineers designed this filter with the racer in mind and with the intention of maximizing flow, filtration and ease of installation. The end caps are machined with -10 AN female fittings with an O-ring receiver groove that allow the filter to flow up to an astonishing 12.32 gpm at 45 psi and 2.63 gpm at 6 psi. All sealing O-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The standard 2-inch OD allows for easy mounting virtually anywhere in the vehicle.
aempower.com

07 Prosport EVO Series Digital Gauges
A 270-degree dial sweep provides quick one-glance accuracy with these track-tested and race-proven gauges. Precision electric senders are used to keep hazardous fluids out of the passenger compartment. All of the EVO Series gauges perform a dramatic opening ceremony with a full digital sweep each time the vehicle is turned on. These gauges are very thin at only 1.5 inches deep, perfect for tight mounting options.
prosportgauges.com

08 Drop Engineering Aluminum Racing Lug Nuts
Carefully crafted from aircraft-grade AL7075 T6 temper 7075 aluminum, Drop Engineering lug nuts will hold up even under the most demanding racing conditions. Drop Engineering forges all lug nuts from AL7075 because it guarantees the greatest strength and performance without any added weight. Each lug nut is carefully crafted from an extruded aluminum billet. Drop Engineering utilizes CNC machinery to ensure the highest grade of precision quality during production. Stylish and durable, Drop Engineering aluminum racing lug nuts are an ideal upgrade for track or street drivers.
dropengineering.com

09 Tomei Subaru Extreme Ti Titanium Exhaust
This high-quality titanium exhaust for various Subaru applications is a great way to increase performance and lower vehicle weight. Only the best grade materials are used for this exhaust, and the special race-inspired design is as straight as possible, providing maximum gains throughout the powerband. Includes street silencer, gaskets and all of the necessary hardware for a clean and straightforward installation.
tomeiusa.com

10 Skunk2 74mm Pro Series Throttle Body
Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth driveability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (computer aided engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC-machined from forged, billet 6061-T6 aluminum and hard-anodized for durability. Additionally, Skunk2’s unique design relocates the MAP sensor underneath and eliminates the OEM water passages for cooler operation and a cleaner appearance.
skunk2.com