Cosworth
’08–09 Subaru STI FMIC
Cosworth’s front-mount intercooler system for the ’08–09 Subaru STI (GRB) installs without any cutting or trimming of the vehicle and features large-diameter powdercoated aluminum tubing and a robust isolated mounting system. The engineered system features a large, efficient aluminum core with mandrel-bent aluminum tubing for maximum performance up to and exceeding 600 hp.
www.cosworthusa.com
MXP
EVO X after-cat exhaust
MXP’s new stainless steel Evolution X (GSR/MR) exhaust system features a dual stainless muffler design and 105mm tips. It measures a healthy 77mm in diameter providing optimal flow and performance. A three-year manufacturer warranty is included.
www.mackinindustries.com
Clutch Masters
EVO X Clutch and Flywheel
Clutch Masters has developed an economical top-of-the-line clutch and flywheel lineup for the EVO X. It features a pull-type pressure plate, complete with the highest strength ductile iron casting and heat-treated diaphragm spring. The pressure plate is paired with a 9.5-inch friction disc, then digitally balanced and tested together to ensure a perfect fit.
www.clutchmasters.com
HKS
Bellmouth Downpipe
HKS’ newly designed bellmouth downpipe for the ’08 Subaru WRX and WRX STI five-door is constructed of a cast-iron bellmouth mated to 75mm SUS304 stainless steel piping. The HKS downpipe is a direct bolt-on replacement to the restrictive factory downpipe. A newly designed exhaust flange adapter allows the downpipe to bolt to the factory center-pipe, HKS center pipe or the forthcoming full 75mm HKS after-cat exhaust system.
www.hksusa.com
Auto Tech Interiors
EVO ePOD
ATI’s dash-mount EVO triple ePod has a “punch out” design that allows you to increase the diameter to accommodate a standard 52mm or increase to a 60mm opening. The ePod comes with three ATI holding rings to ensure the gauges hold tightly. Applications available for Evo 8,9 and 10s.
www.autotechinteriors.com
Hondata
K-Pro Dual Adapter for S2000 and TSX
Hondata has begun shipping the only full tuning solution for drive-by-wire ’06–09 S2000 and ’04–06 Acura TSX vehicles. The Hondata K-Pro Dual Adapter Harness allows drive-by-wire vehicles to utilize the full tuning power of the Hondata K-Pro system consisting of two engine computers: a reprogrammed stock ECU and a specially modified donor K-Pro ECU designed to work together to allow full tuning of supported drive-by wire S2000 and Acura TSX vehicles.
www.hondata.com
Function7 Engineering
RSX Rear Brace
Function7’s new rear brace and sway bar mount for the Acura RSX provides reinforcement for the rear cross-member of the chassis and improves handling and steering response. The integral sway bar mount adds rigidity to the structure of the car and will accommodate all factory and most aftermarket sway bar kits. It’s designed to fit ’02–06 Acura RSX and ’01–05 Honda Civics.
www.function7.com
Fujitsuboz
350Z Legalis R Exhaust
Fujitsubo’s ’07+ 350Z Legalis R exhaust for the VQ35HR motor is designed for street use, and it improves low-end and midrange power. It is constructed of stainless steel and features mandrel-bent piping. The Legalis R is tested to provide optimal power output for street use.
www.tein.com
Snow Performance
Stage-3 Boost Cooler
The new Stage-3 Boost Cooler water/methanol injection kit from Snow Performance features the most sophisticated digital 3-D controller available for more versatility and smooth power under all conditions. The Stage-3G system uses a new injection management controller with special mapping that provides correct injection in normally aspirated as a well as boosted applications.
www.snowperformance.net
Alpinestars
Wreath Tee
Alpinestars 100 percent ringspun cotton jersey Wreath Tee shows off your winning spirit while making you look your best. The tee features prints on the front upper-right shoulder and back bottom-right.
www.alpinestarsmens.com